Bemar Plast: contract plastic injection molding in Italy since 1995

Bemar Plast S.r.l. is a contract plastic injection molding company in San Giovanni Ilarione, near Verona, Italy. Since 1995 we have molded technical components in engineering and commodity polymers to customer drawings. We design the molds, mold parts on 13 presses from 10 to 480 t and handle secondary operations, under an ISO 9001:2015 quality system and with certified 100% renewable electricity.

At a glance

Business
contract injection molding, since 1995
Location
San Giovanni Ilarione, Verona, Italy (ZAI industrial area)
Services
injection molding, mold design, 3D printing
Presses
13, from 10 to 480 t (≈ 530 US tons), including 2 two-shot presses
Quantities
1,000 to 1 million parts a year per part number
Industries
automotive, electronics, rail, non-implantable medical, construction
Quality
ISO 9001 since 2013, now ISO 9001:2015 (IMQ No. 9190.BMRP)
Energy
100% renewable electricity, with Guarantees of Origin
Languages
Italian, English, German, French, Spanish
Three Bemar Plast technicians in the molding shop in San Giovanni Ilarione, near Verona, Italy

Bemar Plast in two and a half minutes

The area where we work, the molding shop, CAD design, the molds, the materials and the people who follow every order.

Company video in Italian, 2 minutes 38 seconds.
Video transcript

[Music. Shots of the surrounding area; on screen, the Bemar Plast logo and the captions "1997" and "oggi" (today).]

Gabriele Gaiga: We had a small farm storehouse near my home. The project started right there, with the installation of three small production units.

We bought some new machinery and moved to what is now our headquarters in San Giovanni Ilarione, Verona. In addition, my sons also started working at Bemar Plast permanently. These developments motivated us even more to grow and improve.

Over the years we have kept renewing our machinery and production processes to improve the service we offer. We keep our shop floor up to date to produce as little waste as possible, to keep reducing energy consumption and, as a result, CO₂ emissions.

[Music. Shots of the production department: robots, moulds, materials and part inspection.]

Now more than ever, Bertilla and I are ready for the generational handover. My sons Damiano, Fabio and Danilo have held the baton for several years now, and I know they will carry the project forward with the same drive to grow that we had when Bemar Plast was founded.

[Music. Closing caption: "Bemar Plast – artigiani dell'Innovazione" (craftsmen of innovation).]

Why an Italian supplier

We mold every part in our own plant near Verona, Italy. For European companies, that means a short, transparent supply chain with a single point of contact.

The Bemar Plast molding shop in San Giovanni Ilarione, near Verona, Italy, with injection molding presses and robots
  • Every part molded in Italy

    We mold every part in our plant in San Giovanni Ilarione, under an ISO 9001:2015 certified quality system, with documented dimensional inspection. 3D-printed prototypes are made in Italy too.

  • A European supply chain

    For customers in the European Union: no customs formalities, Central European Time (CET), single-market rules. Customers outside the EU (UK, Switzerland, US, Canada): standard export customs procedures apply.

  • Molds built in Italy or China, your choice

    On request we prepare a dual quote, Italy and Asia, so you can compare cost and lead time. Every mold is built by qualified partners to our technical specification; design approval, tryout and maintenance stay with us.

  • One technical point of contact

    You talk directly to the people who design and mold your part, from feasibility to finished component.

Our milestones

Key dates, from 1995 to today.

  1. 1995

    Bemar Plast starts contract injection molding of plastics.

  2. 2013

    First certification of the quality system to ISO 9001, issued by IMQ.

  3. 2025

    Thirty years in business. ISO 9001:2015 certificate No. 9190.BMRP is renewed until June 27, 2028.

  4. Today

    13 presses from 10 to 480 t, 100% renewable electricity and the family's second generation leading the company.

Three Bemar Plast colleagues talking in front of the injection molding presses

How we work

You talk directly to the people who design and mold your part, from feasibility to delivery.

  • One point of contact

    One person coordinates the mold, molding, secondary operations and, when needed, 3D-printed prototypes.

  • In-house engineering

    We assess part feasibility with your engineering team and design the molds in-house. Filling simulations are run by specialist partners.

  • Five languages

    Our technical staff work in Italian and English; our sales team also works in German, French and Spanish.

  • Confidentiality

    We sign non-disclosure agreements (NDAs) when the customer requests them, after review by our legal team.

The molding shop

13 thermoplastic molding lines, all in our plant in San Giovanni Ilarione.

  • Presses from 10 to 480 t

    Shot weight in PS from 17.8 g to 1,787 g (≈ 3.9 lb), tie-bar spacing up to 811 × 785 mm (≈ 31.9 × 30.9 in), mold height up to 900 mm (≈ 35.4 in). Two of the presses are two-shot presses with a rotary table.

  • Technologies

    Conventional injection molding, two-shot molding, co-injection, overmolding and micro molding, all in-house.

  • Automation

    3-axis electric robots on 9 lines, with in-line labeling; electric sprue pickers on another 3.

  • Material ready for the press

    Every line has a dehumidifying dryer with molecular sieve desiccant and a mold temperature controller, up to 180 °C (356 °F) on the lines that need it.

Injection molding presses with Hybrid Energy System in the Bemar Plast molding shop
A mold lifted by a hoist next to an injection molding press

Engineering and molds

The mold determines much of the quality of the part. That is why we design, try out and maintain new molds ourselves, and also look after the molds you entrust to us.

  • In-house mold design

    We design the mold in our engineering department. It is built by partners in Italy or China, your choice, to our technical specification; on request we prepare a dual quote, Italy and Asia.

  • Tryout and maintenance

    3D design approval, mold tryout and mold maintenance stay with us.

  • Customer-owned molds

    Molding with customer-owned molds is the core of our business: molds transferred from another supplier, or molds you have had built yourself.

  • Mold storage

    The mold always remains your property. On request we store it in our mold warehouse, treated with specific protective products and looked after by our technicians.

Secondary operations and assembly

Parts can leave our plant ready for your assembly line.

  • Ultrasonic welding

    On our own in-house machine, to join plastic components without adhesives.

  • Assembly

    Assembly of the molded components, managed by us together with the other secondary operations, with one point of contact.

  • Automated work cells

    When the project requires it, we set up automated work cells tailored to your part.

An operator at the bench of a Bemar Plast molding line
A gloved hand placing a molded part for dimensional inspection

Inspection and labeling

Documented measurements in the shop, and labels applied in-line.

  • Image-based measurement

    The KEYENCE IM-X1000 measures the part with no fixtures, using programs generated from the drawing or CAD model, and returns an OK/NG judgment with an inspection report.

  • In-line labeling

    On the 9 robotic lines, labeling is done in-line, with two labeling systems.

Checking the color of a molded component with a portable colorimeter

Quality you can measure

On cosmetic components, we check color with a spectrophotometer and a colorimeter.

Dimensions are measured by the KEYENCE IM-X1000 image measurement system: the part is placed on the stage, with no fixtures, and the values are compared with the drawing. The result is an OK/NG judgment with an inspection report.

Quality system
ISO 9001 since 2013, now ISO 9001:2015 (IMQ certificate No. 9190.BMRP)
Valid
until June 27, 2028
Download the certificate (PDF)

Energy and materials

Electricity
100% renewableFrom renewable sources, certified with Guarantees of Origin.
Presses with Hybrid Energy System
11 of 13Measured energy consumption 30 to 75% lower than the conventional solution.
Beside-the-press granulators
13 of 13To recover sprues and runners, where the customer allows it.
How we approach sustainability

Industries we serve

Technical components for industries with precise requirements for material, tolerances and appearance.

Frequently asked questions about Bemar Plast

Who we are, where we work and how to start a project with us.

Who is Bemar Plast?

Bemar Plast S.r.l. is an Italian contract plastic injection molding company based in San Giovanni Ilarione, near Verona. It molds technical components in engineering and commodity polymers to customer drawings, designs the molds and handles secondary operations.

Where is Bemar Plast located?

Our offices and plant are at Via del Lavoro 94, 37035 San Giovanni Ilarione (VR), Italy, in the ZAI industrial area, in the province of Verona. You can reach us at +39 045 6550855 and [email protected], Monday to Friday, 8 a.m. to 6 p.m. Italian time (2 a.m. to noon ET).

How long has Bemar Plast been in business?

Bemar Plast has been injection molding plastics since 1995. It earned its first ISO 9001 certification in 2013 and marked thirty years in business in 2025.

What does Bemar Plast make?

Bemar Plast makes technical and cosmetic thermoplastic components, injection molded to customer drawings: from micro parts up to parts with a shot weight of 1,787 g (PS, ≈ 3.9 lb), and from batches of 1,000 parts up to 1 million parts a year per part number. Besides conventional molding, we offer two-shot molding, co-injection, overmolding and micro molding.

Which industries do you serve?

We mainly serve the automotive, electronics, rail, medical and construction industries. In the medical field we make components for non-implantable medical applications, produced in a controlled industrial environment, not in a cleanroom.

What certifications does Bemar Plast hold?

Bemar Plast has a quality management system certified to ISO 9001:2015 by IMQ, certificate No. 9190.BMRP, for the injection molding of thermoplastic materials and technical articles. It was first certified on June 28, 2013; the current certificate is valid until June 27, 2028.

What energy do you use in production?

We use 100% electricity from renewable sources, certified with Guarantees of Origin (GO). In addition, 11 of our 13 presses have the Hybrid Energy System, with measured energy consumption 30 to 75% lower than the conventional solution, and all 13 lines have a granulator to recover sprues and runners, where the customer allows it.

Do you manufacture in Italy?

Yes: all injection molding takes place in our own plant in San Giovanni Ilarione, and 3D-printed prototypes are also made in Italy. New molds are designed by us and built by partners in Italy or China, the customer's choice. Customers in the European Union have no customs formalities; for the UK, Switzerland, the US and Canada, standard export customs procedures apply.

Which languages can we communicate in?

Italian, English, German, French and Spanish. Our technical staff work in Italian and English; our sales team supports customers in all five languages.

Do you sign non-disclosure agreements (NDAs)?

Yes. We sign non-disclosure agreements whenever the customer requests one; our legal team reviews each agreement before signing.

Do you also make the molds?

Yes: we design molds in our engineering department and have them built by partners in Italy or China, your choice, to our technical specification. On request we prepare a dual quote, Italy and Asia; 3D design approval, tryout and maintenance stay with us.

Can you mold parts with our existing mold?

Yes: molding with customer-owned molds is the core of our business, whether the mold is transferred from another supplier or you have had it built yourself. In that case we handle molding and secondary operations; the mold remains your property and, on request, we store it in our mold warehouse.

Do you also offer 3D printing and prototypes?

Yes: FDM, SLA and MJF prototypes made in Italy by a qualified service provider, with Bemar Plast as the prime contractor. You have one point of contact from prototype to series production.

How do I request a quote from Bemar Plast?

Email [email protected] with the 2D drawing or 3D model (STEP, IGES or PDF), the material, approximate annual quantities, and your cosmetic and tolerance requirements. If some data is missing, we define it together.

Send us your drawing, and we will tell you how to mold it

We reply with a technical assessment and a quote. To prepare them, we need three pieces of information about your component.

  1. The part

    The 2D drawing or 3D model of the component.

    • STEP
    • IGES
    • PDF
  2. Material and annual volume

    The required material, or the part's operating conditions if the material has yet to be chosen. Then the approximate annual volume.

  3. Cosmetic requirements and tolerances

    Visible surfaces, color and finish, and the critical tolerances to be met.

If you do not have all the data yet, write to us anyway: we will define it together.

Hours
Monday–Friday, 8 a.m.–6 p.m. Italian time (2 a.m.–noon ET)

Page maintained by the Bemar Plast Team. Last updated: November 17, 2026.