Injection molding of plastic enclosures and components for electronics
Bemar Plast has been a contract injection molder since 1995, in San Giovanni Ilarione near Verona, Italy, producing plastic components, enclosures and parts for the electronics industry. From micro components on our 10 t press to parts weighing up to 1.8 kg (≈ 4 lb), with insert overmolding, two-material parts, ultrasonic welding and assembly, all in our plant in Italy.
At a glance
- What we make
- plastic components, enclosures and parts
- Typical materials
- PA66, PBT, PC, PC/ABS, PPA, ABS
- Presses
- 13, from 10 to 480 t, including a 10 t press for micro parts
- Technologies
- insert overmolding, two-shot molding, micro molding
- Secondary operations
- ultrasonic welding, assembly, labeling
- Quantities
- 1,000 to 1 million parts a year per part number
- Molds
- designed in-house, built in Italy or China, or your own
- Quality
- ISO 9001:2015, IMQ No. 9190.BMRP
- Since 1995
- ISO 9001 since 2013
- 13 presses, 10 to 480 t
- In-house ultrasonic welding
- All molding done in Italy
Why an Italian supplier
We mold every part in our own plant near Verona, Italy. For European companies, that means a short, transparent supply chain with a single point of contact.

Every part molded in Italy
We mold every part in our plant in San Giovanni Ilarione, under an ISO 9001:2015 certified quality system, with documented dimensional inspection. 3D-printed prototypes are made in Italy too.
A European supply chain
For customers in the European Union: no customs formalities, Central European Time (CET), single-market rules. Customers outside the EU (UK, Switzerland, US, Canada): standard export customs procedures apply.
Molds built in Italy or China, your choice
On request we prepare a dual quote, Italy and Asia, so you can compare cost and lead time. Every mold is built by qualified partners to our technical specification; design approval, tryout and maintenance stay with us.
One technical point of contact
You talk directly to the people who design and mold your part, from feasibility to finished component.
When we are the right partner for electronics
We are a good fit if
- you design enclosures, supports or technical components for electrical and electronic equipment
- you need overmolded metal inserts, two-material parts or micro components
- you want a single supplier to mold, weld and assemble the component
- you plan ongoing production, from 1,000 parts up to 1 million a year per part number
We are not the right choice if
- the material required is a high-performance specialty polymer, which we do not normally mold
- you need only a few units: in that case we suggest 3D printing
- the decision rests on the lowest price alone
What electronics require of a molded part
Requirements depend on the equipment, the voltages involved and the target market. These are the typical ones in the industry, and how we address them.
Flammability
Enclosures and supports for live parts often require flame-retardant materials, rated to UL 94 (for example V-0, V-2 or HB); for household appliances and many electrical products, specifications also call for glow-wire tests to the IEC 60695-2 series (GWFI, GWIT). Ratings and values depend on the material grade and the wall thickness: we assess them with you on the resin manufacturer's data sheet, before the mold and material are defined.
Dimensional stability
Snap fits, PCB seats and connectors need dimensions that stay stable from batch to batch. On every line the material is dried and the mold has its own temperature controller; dimensions are measured by the KEYENCE IM-X1000 image measurement system.
Inserts and contacts
Threaded inserts, contacts and other metal inserts can be encapsulated in the part during molding, with no subsequent assembly.
Closing the enclosure
Two plastic shells can be joined without screws or adhesives: we have our own ultrasonic welder in-house and also handle assembly.

From prototype to series production
With enclosures, a fit problem often shows up only at assembly. It pays to check it before the mold is built.
3D-printed prototypes
FDM, SLA and MJF prototypes made in Italy by a qualified service provider, with Bemar Plast as the prime contractor, to check form and fit.
A mold designed with you
Our engineering team designs the mold; it is built by partners in Italy or China, your choice, to our technical specification.
Measured samples
The first molded parts are measured and supplied with an inspection report, for your approval before series production.
Quality you can measure
On cosmetic components, we check color with a spectrophotometer and a colorimeter.
Dimensions are measured by the KEYENCE IM-X1000 image measurement system: the part is placed on the stage, with no fixtures, and the values are compared with the drawing. The result is an OK/NG judgment with an inspection report.
- Quality system
- ISO 9001 since 2013, now ISO 9001:2015 (IMQ certificate No. 9190.BMRP)
- Valid
- until June 27, 2028
Molding technologies for electronics
All of them in-house, in our plant in San Giovanni Ilarione. Fewer assembly steps mean fewer errors on your line.

Overmolding and insert molding
Metal inserts, contacts or previously molded components encapsulated in the part during molding.
Micro molding
A 10 t press dedicated to small, precise parts, including two-material parts.
Two-shot (2K) molding
Two materials or two colors in a single cycle, on presses with a rotary table: for example a soft or sealing TPE area on a rigid base.
Co-injection
Two materials injected into the same cavity, combining a cosmetic skin and a technical core in one part.
Ultrasonic welding
On our own in-house machine, to join plastic shells and components without adhesives.
Services for your electronics project
- Contract plastic injection moldingTechnical components in engineering and commodity polymers, from batches of 1,000 parts up to 1 million parts a year per part number.
- Injection mold design and manufacturingPart co-design and molds built in Italy or China, with a dual quote on request.
- 3D printingFDM, SLA and MJF prototypes made in Italy, to check snap fits and assembly before the mold is built.
Frequently asked questions about electronics
Answers to the questions electronics buyers and engineering teams ask us most often.
Do you make plastic components for electronics?
Yes: Bemar Plast is a contract injection molder of plastic components, enclosures and parts for the electronics industry, made to customer drawings. We produce in our plant in San Giovanni Ilarione, near Verona, Italy, on 13 presses from 10 to 480 t.
Which materials do you use for electronics?
We mainly use engineering polymers such as PA66, PBT, PC, PC/ABS and PPA, and commodity polymers such as ABS. We do not normally mold high-performance specialty polymers; we assess other materials on request, together with your engineering team.
How do you handle UL 94 flammability requirements?
The UL 94 rating depends on the material grade and the wall thickness, and is documented by the resin manufacturer. We assess the right grade with you on the technical data sheet, before the mold and material are defined.
How do you handle glow-wire requirements?
We assess them on the material grade, as with UL 94: GWFI and GWIT values to the IEC 60695-2 series depend on the grade and the wall thickness, and are documented by the resin manufacturer. Together with you, we choose a grade that meets your specifications before the mold and material are defined.
Can you overmold metal inserts?
Yes. We overmold metal inserts, such as threaded inserts or contacts, and previously molded components, encapsulating them in the part during molding.
Do you mold very small parts?
Yes: we have a 10 t press dedicated to micro molding, with a second injection unit, so small parts can also be made in two materials.
Can you weld and assemble enclosures?
Yes. We have our own ultrasonic welder to join plastic components without adhesives, we handle assembly and, when volumes justify it, we build automated work cells dedicated to your part.
How do you check part dimensions?
Dimensions are measured by the KEYENCE IM-X1000 image measurement system, with programs generated from the drawing or CAD model, an OK/NG result and an inspection report. Our quality system is certified to ISO 9001:2015 (IMQ No. 9190.BMRP).
What quantities do you handle?
We handle quantities from 1,000 parts, the minimum batch we recommend, up to 1 million parts a year per part number. For smaller quantities, or to validate the design, we offer 3D-printed prototypes.
Do you make prototypes before the mold?
Yes, FDM, SLA and MJF prototypes made in Italy by a qualified service provider, with Bemar Plast as the prime contractor. You have one point of contact from prototype to series production.
Where are the molds built?
New molds are designed by us and built by partners in Italy or China, your choice, to our technical specification. Molding always takes place in our plant in Italy.
What do you need to prepare a quote?
To prepare a quote we need the 2D drawing or 3D model (STEP, IGES or PDF), the material or the required UL 94 rating, approximate annual quantities, and the cosmetic and tolerance requirements. If some data is missing, we define it together.
Send us your drawing, and we will tell you how to mold it
We reply with a technical assessment and a quote. To prepare them, we need three pieces of information about your component.
-
The part
The 2D drawing or 3D model of the component.
- STEP
- IGES
-
Material and annual volume
The required material, or the part's operating conditions if the material has yet to be chosen. Then the approximate annual volume.
-
Cosmetic requirements and tolerances
Visible surfaces, color and finish, and the critical tolerances to be met.
If you do not have all the data yet, write to us anyway: we will define it together.
- Phone
- +39 045 6550855
- [email protected]
- Hours
- Monday–Friday, 8 a.m.–6 p.m. Italian time (2 a.m.–noon ET)
Page maintained by the Bemar Plast Team. Last updated: November 17, 2026.