Contract injection molding in Italy

We produce technical thermoplastic components for the automotive, electronics, rail, medical and construction industries. We take care of the mold, molding on 13 presses from 10 to 480 t and quality control, through to the finished part.

Bemar Plast at a glance

  • ISO 9001:2015

    Certified since 2013, now to the 2015 edition (IMQ No. 9190.BMRP), valid until June 27, 2028.

  • 100% renewable electricity

    Certified with Guarantees of Origin.

  • Molded in Italy since 1995

    We design and mold in our own plant in San Giovanni Ilarione, near Verona.

  • 13 presses from 10 to 480 t

    Including two-shot presses with rotary table, and robots on 9 lines.

Main industries

  • Automotive
  • Electronics
  • Rail
  • Non-implantable medical
  • Construction
All industries

The molding shop in action

Molding shop
San Giovanni Ilarione, Verona, Italy

One molding shop, from engineering polymer pellets to your component.

Why an Italian supplier

We mold every part in our own plant near Verona, Italy. For European companies, that means a short, transparent supply chain with a single point of contact.

Three Bemar Plast technicians in the molding shop
  • Every part molded in Italy

    We mold every part in our plant in San Giovanni Ilarione, under an ISO 9001:2015 certified quality system, with documented dimensional inspection. 3D-printed prototypes are made in Italy too.

  • A European supply chain

    For customers in the European Union: no customs formalities, Central European Time (CET), single-market rules. Customers outside the EU (UK, Switzerland, US, Canada): standard export customs procedures apply.

  • Molds built in Italy or China, your choice

    On request we prepare a dual quote, Italy and Asia, so you can compare cost and lead time. Every mold is built by qualified partners to our technical specification; design approval, tryout and maintenance stay with us.

  • One technical point of contact

    You talk directly to the people who design and mold your part, from feasibility to finished component.

From drawing to finished part

One point of contact all the way through. Here is what happens to your component at Bemar Plast.

  1. Technical drawing of a plastic part

    Co-design

    We review the drawing with your engineering team: material, wall thickness, draft angles, gate locations. If you need a prototype, we have it made in FDM, SLA or MJF by a qualified service provider, and remain your single point of contact.

  2. Technician inspecting an open injection mold

    Mold

    The mold is built by partner toolmakers to our technical specification: we approve the design before the build and run the mold tryout in our plant. We carry out routine maintenance in our own toolroom.

  3. Plastic resin dryers beside the injection presses

    Material drying

    Every line has its own molecular-sieve dryer, rotary-wheel or twin-tower. Pellets enter the press at the correct moisture content, which is essential for hygroscopic materials such as PA and PBT.

  4. Molding shop with injection presses and robots

    Molding

    13 presses from 10 to 480 t: 9 with 3-axis electric robots, 2 for two-shot molding with a rotary table. Co-injection, insert overmolding and micro molding are all done in-house.

  5. Spectrophotometer checking the color of molded parts

    Quality control

    We check color and appearance with a spectrophotometer and a colorimeter. Dimensions are measured by the KEYENCE IM-X1000 image measurement system, which compares the part with the drawing or the CAD model.

  6. Operators packing molded parts

    Finished part

    On the 9 robotic lines, parts are labeled directly in line. Sprues and runners go back to the beside-the-press granulator, where the customer allows them to be recovered.

Our press fleet

13 molding lines, from a 10 t press for micro molding to a 480 t press for parts up to 1.8 kg. Select a press to see its data.

Highlight

Full press fleet table

Data as of February 7, 2025. On every line: dehumidifying dryer, beside-the-press granulator, mold temperature controller.

Checking the color of a molded component with a portable colorimeter

Quality you can measure

On cosmetic components, we check color with a spectrophotometer and a colorimeter.

Dimensions are measured by the KEYENCE IM-X1000 image measurement system: the part is placed on the stage, with no fixtures, and the values are compared with the drawing. The result is an OK/NG judgment with an inspection report.

Quality system
ISO 9001 since 2013, now ISO 9001:2015 (IMQ certificate No. 9190.BMRP)
Valid
until June 27, 2028
Download the certificate (PDF)

Energy and materials

Electricity
100% renewableFrom renewable sources, certified with Guarantees of Origin.
Presses with Hybrid Energy System
11 of 13Measured energy consumption 30 to 75% lower than the conventional solution.
Beside-the-press granulators
13 of 13To recover sprues and runners, where the customer allows it.
How we approach sustainability

Injection molding explained in a minute

Materials, molds, finishes and technologies: in our short videos, we answer the questions customers ask us most often.

Follow us on Instagram, @bemar_plast (opens in a new tab)

Send us your drawing, and we will tell you how to mold it

We reply with a technical assessment and a quote. To prepare them, we need three pieces of information about your component.

  1. The part

    The 2D drawing or 3D model of the component.

    • STEP
    • IGES
    • PDF
  2. Material and annual volume

    The required material, or the part's operating conditions if the material has yet to be chosen. Then the approximate annual volume.

  3. Cosmetic requirements and tolerances

    Visible surfaces, color and finish, and the critical tolerances to be met.

If you do not have all the data yet, write to us anyway: we will define it together.

Hours
Monday–Friday, 8 a.m.–6 p.m. Italian time (2 a.m.–noon ET)