Medical plastic injection molding for non-implantable applications
Bemar Plast has been a contract injection molder since 1995, in San Giovanni Ilarione near Verona, Italy, producing plastic components for non-implantable medical applications. We mold in a controlled industrial environment, not in a cleanroom, under an ISO 9001:2015 quality system. We say so up front, so you can tell right away whether your component is a fit for us.
At a glance
- What we make
- components for non-implantable medical applications
- Environment
- controlled industrial environment, not a cleanroom
- Typical materials
- PC, PP, ABS, PMMA, TPE, in grades chosen with the customer
- Technologies
- micro molding, two-shot molding, overmolding
- Presses
- 13, from 10 to 480 t, 2 two-shot
- Inspection
- KEYENCE IM-X1000 image measurement, inspection report
- Molds
- designed in-house, built in Italy or China, or your own
- Quality
- ISO 9001:2015, IMQ No. 9190.BMRP
- Since 1995
- ISO 9001 since 2013
- Micro molding on a 10 t press
- KEYENCE image-based measurement
- All molding done in Italy
Why an Italian supplier
We mold every part in our own plant near Verona, Italy. For European companies, that means a short, transparent supply chain with a single point of contact.

Every part molded in Italy
We mold every part in our plant in San Giovanni Ilarione, under an ISO 9001:2015 certified quality system, with documented dimensional inspection. 3D-printed prototypes are made in Italy too.
A European supply chain
For customers in the European Union: no customs formalities, Central European Time (CET), single-market rules. Customers outside the EU (UK, Switzerland, US, Canada): standard export customs procedures apply.
Molds built in Italy or China, your choice
On request we prepare a dual quote, Italy and Asia, so you can compare cost and lead time. Every mold is built by qualified partners to our technical specification; design approval, tryout and maintenance stay with us.
One technical point of contact
You talk directly to the people who design and mold your part, from feasibility to finished component.
When we are the right partner for medical components
We are a good fit if
- the component is intended for non-implantable medical applications
- production in a controlled industrial environment is compatible with your project
- you need small, precise parts, including two-material parts
- you plan ongoing production, from 1,000 parts upward
We are not the right choice if
- the component must be produced in a cleanroom
- the component is intended to be implanted
- your specifications require a quality management certification other than ISO 9001
What we do and what we don't, stated clearly
In the medical field, requirements depend on the function of the component and the class of the finished product, and responsibility for compliance remains with the manufacturer. Before asking us for a quote, please check these three points.
Non-implantable applications only
We mold components for non-implantable medical applications. We do not produce parts intended to be implanted in the body.
No cleanroom
We produce in a controlled industrial environment, not in a cleanroom. If the component requires cleanroom production or packaging, we are not the right supplier.
ISO 9001:2015 quality system
Our quality management system is certified to ISO 9001:2015 by IMQ (No. 9190.BMRP) for the injection molding of thermoplastic materials and technical articles. Please check that this is sufficient for your component.
Typical requirements for medical components
Within these limits, these are the most common requirements in the industry and how we address them.
Medical-grade materials
For many applications, the manufacturer chooses material grades with biocompatibility documentation issued by the resin manufacturer. You specify the grade or we choose it together; we mold it as your specifications require.
Precision on small parts
A 10 t press is dedicated to micro molding, including two-material parts. Dimensions are measured by the KEYENCE IM-X1000 system, with an OK/NG result and an inspection report.
Clarity and appearance
PC and PMMA are typical materials for transparent parts. On every line the material is dried before molding, and we check part color with a spectrophotometer and a colorimeter.
Grips and soft-touch areas
With two-shot molding we combine a rigid base and a soft TPE area in a single cycle, with no subsequent assembly.

Quality you can measure
On cosmetic components, we check color with a spectrophotometer and a colorimeter.
Dimensions are measured by the KEYENCE IM-X1000 image measurement system: the part is placed on the stage, with no fixtures, and the values are compared with the drawing. The result is an OK/NG judgment with an inspection report.
- Quality system
- ISO 9001 since 2013, now ISO 9001:2015 (IMQ certificate No. 9190.BMRP)
- Valid
- until June 27, 2028
Services for your medical component
- Contract plastic injection moldingTechnical components in engineering and commodity polymers, from batches of 1,000 parts up to 1 million parts a year per part number.
- Injection mold design and manufacturingPart co-design and molds built in Italy or China, with a dual quote on request.
- 3D printingFDM, SLA and MJF prototypes made in Italy, to check form and fit before the mold is built.
Frequently asked questions about medical components
Answers to the questions buyers and engineering teams in the medical field ask us most often.
Do you make components for the medical industry?
Yes, we make plastic components for non-implantable medical applications, produced in a controlled industrial environment, not in a cleanroom. We mold in our plant in San Giovanni Ilarione, near Verona, Italy, under a quality system certified to ISO 9001:2015.
Do you have a cleanroom?
No. We produce in a controlled industrial environment, not in a cleanroom: for components that require cleanroom production we are not the right supplier, and we tell you so before quoting.
Do you make implantable components?
No. We mold only components for non-implantable medical applications.
What certification does your quality system hold?
Our quality management system is certified to ISO 9001:2015 by IMQ, certificate No. 9190.BMRP, for the injection molding of thermoplastic materials and technical articles. We do not hold certifications specific to the medical industry: please check that ISO 9001 is sufficient for your component.
Which materials do you use for medical applications?
Among the materials we mold, PC, PP, ABS, PMMA and TPE are often used for medical applications, in medical grades chosen by the manufacturer. Biocompatibility documentation for the grade is issued by the resin manufacturer.
Can you mold very small parts?
Yes: we have a 10 t press dedicated to micro molding, with a second injection unit, so small parts can also be made in two materials.
How do you check part dimensions?
Dimensions are measured by the KEYENCE IM-X1000 image measurement system, with programs generated from the drawing or CAD model, an OK/NG result and an inspection report.
Can you make two-material parts?
Yes. On two presses with a rotary table we make two-material or two-color parts in a single cycle, for example a rigid base with a soft TPE area. We also offer overmolding and co-injection.
Where are the molds built?
New molds are designed by us and built by partners in Italy or China, your choice, to our technical specification. Molding always takes place in our plant in Italy.
Do you sign non-disclosure agreements (NDAs)?
Yes. We sign non-disclosure agreements whenever the customer requests one; our legal team reviews each agreement before signing.
What do you need to prepare a quote?
To prepare a quote we need the 2D drawing or 3D model (STEP, IGES or PDF), the material grade, approximate annual quantities and the intended use of the component, including whether it requires a cleanroom. If some data is missing, we define it together.
Send us your drawing, and we will tell you how to mold it
We reply with a technical assessment and a quote. To prepare them, we need three pieces of information about your component.
-
The part
The 2D drawing or 3D model of the component.
- STEP
- IGES
-
Material and annual volume
The required material, or the part's operating conditions if the material has yet to be chosen. Then the approximate annual volume.
-
Cosmetic requirements and tolerances
Visible surfaces, color and finish, and the critical tolerances to be met.
If you do not have all the data yet, write to us anyway: we will define it together.
- Phone
- +39 045 6550855
- [email protected]
- Hours
- Monday–Friday, 8 a.m.–6 p.m. Italian time (2 a.m.–noon ET)
Page maintained by the Bemar Plast Team. Last updated: November 17, 2026.